SRT Engine Airflow Development Engineer

Stellantis logo
Stellantis
Screened
Auburn Hills, Michigan
Posted 1 week ago
Apply Now

About the role

About the Role

Be Part of the Next Era of Performance Engineering at SRT

We’re not just building vehicles; we’re reigniting a legend. Stellantis has officially revived the iconic Street and Racing Technology (SRT) performance division to unify high-performance engineering across Chrysler, Dodge, Jeep, and Ram and bring back the thrill and authenticity that performance enthusiasts crave.  SRT is assembling a team of the best and brightest to deliver the next generation of exhilarating, track-ready powertrains that will define the future of performance vehicles. This is your chance to be part of the rebirth of SRT, where heritage meets cutting-edge technology and engineering excellence accelerates every mile. 

Be part of the next era of performance engineering at SRT. The SRT Airflow Development Engineer is responsible for developing and optimizing turbocharger, supercharger, induction, and charge-air systems for high-performance propulsion programs. The role converts horsepower, torque, response, thermal, durability, emissions, and vehicle-performance objectives into robust airflow-system requirements and validated hardware solutions.

This engineer works at the intersection of engine performance, aerodynamics, thermodynamics, controls, hardware design, and vehicle integration. The successful candidate will use simulation, test data, supplier collaboration, and hands-on development to deliver the airflow capacity, boost response, charge temperature control, and distinctive performance character expected from SRT.

Key Responsibilities

Forced-Induction System Development

  • Lead turbocharger and supercharger airflow development from concept selection through production validation and launch.
  • Translate SRT power, torque, transient response, track capability, emissions, and durability targets into system and component requirements.
  • Perform turbocharger and supercharger matching, including compressor flow, pressure ratio, efficiency, speed margin, surge margin, turbine flow, drive ratio, bypass strategy, and operating limits.
  • Evaluate single- and multi-turbo architectures, Roots-type and twin-screw superchargers, centrifugal compressors, and electrically assisted boosting concepts as required by program objectives.
  • Own technical trade studies balancing peak output, low-speed response, parasitic loss, thermal performance, packaging, cost, timing, and manufacturability.

Air Induction & Charge-Air Systems

  • Develop the end-to-end airflow path including hood or grille inlets, air cleaners, ducts, compressor inlets, throttle bodies, charge pipes, intercoolers, manifolds, bypass valves, surge valves, and associated sensors.
  • Establish airflow, restriction, pressure-drop, temperature, leakage, and distribution targets at component and system levels.
  • Optimize compressor-inlet quality, manifold distribution, pressure recovery, charge-air cooling effectiveness, and cylinder-to-cylinder airflow consistency.
  • Collaborate with packaging and vehicle teams to deliver compact, serviceable, production-feasible systems without compromising SRT performance objectives.
  • Support acoustic development of induction and forced-induction sound quality while maintaining airflow and durability requirements.

Simulation, Analysis & Data Correlation

  • Use 1D engine simulation, compressor and turbine maps, CFD, heat-transfer analysis, and system models to predict airflow-system performance.
  • Define model inputs, boundary conditions, acceptance criteria, and correlation plans; challenge assumptions and close gaps between simulation and test results.
  • Analyze high-speed data for mass airflow, boost pressure, compressor speed, turbine inlet conditions, temperature, restriction, pressure pulsation, torque, and power.
  • Create clear technical recommendations from simulation and test data for design reviews and SRT leadership decisions.

Dyno, Vehicle & Track Development

  • Plan and execute flow-bench, gas-stand, engine-dyno, chassis-dyno, vehicle, hot-weather, altitude, and track testing.
  • Instrument systems and evaluate boost control, response, heat soak, repeatability, pressure loss, surge, overspeed, thermal protection, and sustained high-load capability.
  • Partner with combustion and calibration teams to optimize air charge, spark, fueling, torque delivery, knock margin, emissions, and component protection.
  • Lead root-cause investigations and corrective actions for airflow, performance, thermal, durability, and drivability issues.
  • Support prototype builds, teardown reviews, development trips, validation events, and launch readiness.

Controls, Thermal & Durability Integration

  • Define functional requirements for wastegates, bypass valves, surge valves, electronic actuators, compressor-speed sensing, and boost-control interfaces.
  • Coordinate with controls and calibration engineers on steady-state and transient boost control, torque response, protection strategies, diagnostics, and OBD requirements.
  • Develop thermal-management requirements for compressor discharge, charge-air cooling, turbine housings, bearings, lubrication, coolant circuits, shields, ducts, and surrounding components.
  • Assess failure modes including surge, choke, overspeed, oil coking, bearing distress, belt slip, rotor contact, thermal fatigue, joint leakage, and intercooler performance degradation.
  • Contribute technical content to DFMEA, DVP&R, design reviews, issue-resolution reports, and engineering release documentation.

Supplier & Cross-Functional Leadership

  • Lead technical engagement with turbocharger, supercharger, intercooler, actuator, duct, throttle, and sensor suppliers.
  • Define and review supplier specifications, design proposals, performance maps, validation plans, manufacturing controls, and production-readiness evidence.
  • Collaborate across SRT propulsion, combustion, calibration, controls, exhaust, cooling, CAE, design, manufacturing, quality, purchasing, vehicle integration, and testing teams.
  • Communicate risks, trade-offs, decisions, and recovery plans clearly to technical and executive stakeholders.
  • Mentor engineers and strengthen SRT methods, standards, and reusable knowledge for forced-induction airflow development.

Basic Qualifications:

  • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a closely related discipline.
  • Minimum of 8 years of experience in the industry
  • Engineering experience in forced induction, air induction, engine performance, combustion systems, thermal systems, or propulsion development.
  • Strong fundamentals in thermodynamics, fluid mechanics, heat transfer, compressor behavior, internal-combustion engine operation, and data analysis.
  • Experience developing or validating turbocharger and/or supercharger systems, air induction, charge-air cooling, or related high-flow hardware.
  • Ability to interpret compressor and turbine maps, engine-dyno results, vehicle data, drawings, GD&T, simulations, and supplier technical documentation.
  • Experience planning tests, diagnosing complex system issues, and driving corrective actions across multiple engineering functions.
  • Strong written, verbal, and presentation skills, with the ability to communicate clearly to technical teams and leadership.

Preferred Qualifications:

  • Master's degree in Mechanical Engineering, Aerospace Engineering, or a related technical field.
  • Experience developing high-specific-output gasoline engines, racing engines, or severe-duty forced-induction systems.
  • Hands-on experience with engine dynos, vehicle testing, flow benches, gas stands, pressure and temperature instrumentation, and high-speed data acquisition.
  • Experience with GT-SUITE or GT-POWER, Ricardo WAVE, CFD tools, MATLAB, Simulink, or equivalent analysis environments.
  • Knowledge of turbocharger aerodynamics, supercharger rotor systems, intercooler design, compressor-speed limits, bearing systems, lubrication, and thermal protection.
  • Experience with boost controls, electronic actuators, diagnostics, calibration integration, emissions development, and production launch.
  • Background in motorsports, track development, high-performance vehicle programs, or enthusiast performance products.

About this listing

Screened by Joboru

This role passed our automated spam and quality filters and was active in our feed when last checked. Joboru is an aggregator — here is how we screen listings. If anything looks off, tell us.